Paz Penín

Catedrático/a de universidade

Área de Mecánica de Fluídos
Departamento de Enxeñaría Mecánica, Máquinas e Motores Térmicos e Fluídos

Información de contacto

Escola de Enxeñaría Industrial (Torrecedeira)
Despacho 211
Rúa Conde de Torrecedeira
36208 Vigo

cpaz@uvigo.es

 

Resultados de investigación

Article
Paz, C., Suárez, E., Cabarcos, A., Pinto, S.I.S.,
Numerical Study of a Thrombus Migration Risk in Aneurysm After Coil Embolization in Patient Cases: FSI Modelling
Cardiovascular Engineering and Technology, 14, 4, 2023 | DOI

Article
Vence, J., Paz, C., Suárez, E., Cabarcos, A., Conde-Fontenla, M.,
Experimental evaluation of the effect of ozone treatment on the oxidation and removal of dry soot deposits of the exhaust gas recirculation system
Heliyon, 9, 7, 2023 | DOI

Article
Vence, J., Paz, C., Suárez, E., Cabarcos, A., Concheiro, M.,
Analysis of the local growth and density evolution of soot deposits generated under hydrocarbon condensation: 3D simulation and detailed experimental validation
Results in Engineering, 18, , 2023 | DOI

Article
Paz, C., Suárez, E., Cabarcos, A., Díaz, A.,
Experimental Investigation and CFD Analysis of Pressure Drop in an ORC Boiler for a WHRS Implementation
Sensors, 22, 23, 2022 | DOI

Article
Paz, C., Cabarcos, A., Conde, M., Gil, C.
Comparison of characteristics evaluated by different fractal approaches of soot agglomerates produced by a combustion aerosol generator
Experimental Thermal and Fluid Science, 136, , 2022 | DOI

Article
Cabarcos, A., Paz, C., Pérez-Orozco, R., Vence, J.
An image-processing algorithm for morphological characterisation of soot agglomerates from TEM micrographs: Development and functional description
Powder Technology, 401, , 2022 | DOI

Article
Paz, C., Cabarcos, A., Vence, J., Gil, C.
Development of an active contour based algorithm to perform the segmentation of soot agglomerates in uneven illumination TEM imaging
Powder Technology, 400, , 2022 | DOI

Article
Paz, C., Suárez, E., Gil, C., Vence, J.,
Assessment of the methodology for the CFD simulation of the flight of a quadcopter UAV
Journal of Wind Engineering and Industrial Aerodynamics, 218, , 2021 | DOI

Article
Paz, C., Suárez, E., Cabarcos, A., Pinto, S.I.S.,
FSI modeling on the effect of artery-aneurysm thickness and coil embolization in patient cases
Computer Methods and Programs in Biomedicine, 206, , 2021 | DOI

Article
Conde-Fontenla, M., Paz, C., Concheiro, M., Ribatski, G.,
On the width and mean value of bubble size distributions under subcooled flow boiling
Experimental Thermal and Fluid Science, 124, , 2021 | DOI

Article
Paz, C., Suárez, E., Vence, J., Hoard, J.,
Evolution of EGR cooler deposits under hydrocarbon condensation: Analysis of local thickness, roughness, and fouling layer density
International Journal of Thermal Sciences, 161, , 2021 | DOI

Article
Paz, C., Suárez, E., Gil, C., Parga, O.,
Numerical modelling of osteocyte growth on different bone tissue scaffolds
Computer Methods in Biomechanics and Biomedical Engineering, , , 2021 | DOI

Article
Paz, C., Suárez, E., Gil, C., Baker, C.,
CFD analysis of the aerodynamic effects on the stability of the flight of a quadcopter UAV in the proximity of walls and ground
Journal of Wind Engineering and Industrial Aerodynamics, 206, , 2020 | DOI

Article
Paz, C., Suárez, E., Vence, J., Cabarcos, A.,
Fouling evolution on ribbed surfaces under EGR dry soot conditions: Experimental measurements and 3D model validation
International Journal of Thermal Sciences, 151, , 2020 | DOI

Article
Paz, C., Suárez, E., Conde, M., Vence, J.,
Development of a Computational Fluid Dynamics Model for Predicting Fouling Process Using Dynamic Mesh Model
Heat Transfer Engineering, 41, 2, 2020 | DOI

Article
Paz, C., Suárez, E., Porteiro, J., Díaz, A.,
New methodology for CFD simulations of compact evaporators used in automotive ORC systems
International Journal of Thermal Sciences, 143, , 2019 | DOI

Article
Paz, C., Suárez, E., Vence, J., Cabarcos, A.,
Analysis of the volume of fluid (VOF) method for the simulation of the mucus clearance process with CFD
Computer Methods in Biomechanics and Biomedical Engineering, 22, 5, 2019 | DOI

Article
Paz, C., Suárez, E., Concheiro, M., Diaz, A.,
Development of a pattern recognition methodology with thermography and implementation in an experimental study of a boiler for a WHRS-ORC
Sensors (Switzerland), 19, 7, 2019 | DOI

Conference Paper
Paz, C., Suárez, E., Cabarcos, A., Gil, C.,
Development of an online tool based on CFD and object-oriented programming to support teaching fluid mechanics
Multi Conference on Computer Science and Information Systems, MCCSIS 2019 – Proceedings of the International Conference on e-Learning 2019, , , 2019 | DOI

Article
Paz, C., Suárez, E., Gil, C., Cabarcos, A.,
Effect of realistic ballasted track in the underbody flow of a high-speed train via CFD simulations
Journal of Wind Engineering and Industrial Aerodynamics, 184, , 2019 | DOI

Conference Paper
Paz, C., Suárez, E., Concheiro, M., Conde, M.,
CFD simulation of the oral-nasal flow partitioning during a breathing cycle based on the soft palate movement
Smart Innovation, Systems and Technologies, 71, , 2018 | DOI

Article
Paz, C., Conde, M., Porteiro, J., Concheiro, M.,
On the application of image processing methods for bubble recognition to the study of subcooled flow boiling of water in rectangular channels
Sensors (Switzerland), 17, 6, 2017 | DOI

Article
Paz, C., Conde, M., Porteiro, J., Concheiro, M.,
Effect of heating surface morphology on active site density in subcooled flow nucleated boiling
Experimental Thermal and Fluid Science, 82, , 2017 | DOI

Article
Paz, C., Suárez, E., Concheiro, M., Porteiro, J.,
CFD transient simulation of a breathing cycle in an oral-nasal extrathoracic model
Journal of Applied Fluid Mechanics, 10, 3, 2017 | DOI

Article
Paz, C., Suárez, E., Parga, O., Vence, J.,
Glottis effects on the cough clearance process simulated with a CFD dynamic mesh and Eulerian wall film model
Computer Methods in Biomechanics and Biomedical Engineering, 20, 12, 2017 | DOI

Article
Paz, C., Suárez, E., Gil, C.,
Numerical methodology for evaluating the effect of sleepers in the underbody flow of a high-speed train
Journal of Wind Engineering and Industrial Aerodynamics, 167, , 2017 | DOI

Article
Paz, C., Suárez, E., Vence, J.,
CFD transient simulation of the cough clearance process using an Eulerian wall film model
Computer Methods in Biomechanics and Biomedical Engineering, 20, 2, 2017 | DOI

Article
Paz, C., Conde, M., Porteiro, J., Concheiro, M.,
Effect of heating surface morphology on the size of bubbles during the subcooled flow boiling of water at low pressure
International Journal of Heat and Mass Transfer, 89, , 2015 | DOI

Article
Carrera, J., Sanchez, A., Navarro, A., Paz, C., Porteiro, J.,
Fatigue Life Calculation under Thermal Multiaxial Stresses in EGR Coolers
SAE International Journal of Materials and Manufacturing, 8, 3, 2015 | DOI

Article
Paz, C., Suárez, E., Gil, C., Concheiro, M.,
Numerical study of the impact of windblown sand particles on a high-speed train
Journal of Wind Engineering and Industrial Aerodynamics, 145, , 2015 | DOI

Article
Paz, M.C., Conde, M., Suárez, E., Concheiro, M.,
On the effect of surface roughness and material on the subcooled flow boiling of water: Experimental study and global correlation
Experimental Thermal and Fluid Science, 64, , 2015 | DOI

Conference Paper
Gil, C., Paz, C., Suárez, E., Conde, M.,
A computational fluid dynamics comparison of the underflow of different commercial high-speed trains
Civil-Comp Proceedings, , , 2015 | DOI

Conference Paper
Paz, C., Suárez, E., Gil, C., Concheiro, M.,
CFD assessment of the effect of windblown sand on a high-speed train
Proceedings of the ECCOMAS Thematic Conference on Multibody Dynamics 2015, Multibody Dynamics 2015, , , 2015 | DOI

Conference Paper
Gil, C., Paz, C., Suárez, E., Conde, M.,
A computational fluid dynamics comparison of the underflow of different commercial high-speed trains
Civil-Comp Proceedings, 108, , 2015 | DOI

Conference Paper
Paz, C., Eirís, A., Porteiro, J., Suarez, E.,
The simulation of a rankine based waste heat recovery system for a heavy duty diesel engine
WIT Transactions on Engineering Sciences, 83, , 2014 | DOI

Conference Paper
Paz, C., Porteiro, J., Copo, A., Díaz, A.,
Implementation of a nucleate boiling flux partitioning model for a CFD simulation of compact heat exchangers based on the local estimation of bulk properties
WIT Transactions on Engineering Sciences, 82, , 2014 | DOI

Conference Paper
Paz, C., Gil, C., Suárez, E., Porteiro, J.,
Comparison of turbulent models applied to the aerodynamics of a high speed train
Civil-Comp Proceedings, 105, , 2014 | DOI

Conference Paper
Paz, C., Gil, C., Suárez, E., Concheiro, M.,
Aerodynamic simulations of high-speed trains
Civil-Comp Proceedings, 105, , 2014 | DOI

Conference Paper
Paz, C., Suárez, E., Eirís, A., Porteiro, J.,
Development of a predictive CFD fouling model for diesel engine exhaust gas systems
Heat Transfer Engineering, 34, 8-9, 2013 | DOI

Conference Paper
Paz, C., Suárez, E., Concheiro, M., Porteiro, J., Valdés, R.,
CFD simulation of a CT scan oral-nasal extrathoracic model
WIT Transactions on Engineering Sciences, 79, , 2013 | DOI

Article
Paz, C., Suárez, E., Concheiro, M., Porteiro, J.,
Experimental study of soot particle fouling on ribbed plates: Applicability of the critical local wall shear stress criterion
Experimental Thermal and Fluid Science, 44, , 2013 | DOI

Conference Paper
Paz, C., Suárez, E., Concheiro, M., Copo, A., Tobio, V.,
CFD implementation and experimental validation of the Chen model for heat transfer in nucleate boiling
WIT Transactions on Engineering Sciences, 79, , 2013 | DOI

Article
Paz, C., Suárez, E., Eirís, A., Porteiro, J.,
Experimental evaluation of the critical local wall shear stress around cylindrical probes fouled by diesel exhaust gases
Experimental Thermal and Fluid Science, 38, , 2012 | DOI

Article
Silva, F.B., Díaz, A.L., Del Corral Matías, O.L., Penín, C.P.,
The university practices as a tool of labour insertion for industrial Engineers: Carrying out audits of safety of installations
Profesorado, 16, 1, 2012 | DOI

Conference Paper
Eirís, A., Paz, C., Suárez, E., Concheiro, M., Castaño, C.,
CFD numerical simulation of HP-EGR cooler performance under pulsating engine conditions
SAE Technical Papers, , , 2011 | DOI

Conference Paper
Paz, M.C., Porteiro, J., Eirís, A., Suárez, E.,
Computational model for particle deposition in turbulent gas flows for CFD codes
WIT Transactions on Engineering Sciences, 68, , 2010 | DOI

Conference Paper
Simón, D., Paz, M.C., Eirís, A., Suárez, E.,
Eulerian model for the prediction of nucleate boiling of refrigerant in heat exchangers
WIT Transactions on Engineering Sciences, 68, , 2010 | DOI

Conference Paper
Paz, C., Porteiro, J., Eirís, A., Suárez, E., Sánchez, A., Castaño, C.,
Pressure Drop in Protective Metal Meshes in Clean Low EGR Loop
SAE Technical Papers, 2009-January, January, 2009 | DOI

Article
Murillo, S., Míguez, J.L., Porteiro, J., López-González, L.M., Granada, E., Morán, J.C., Paz, C.,
Exhaust emissions from diesel, LPG, and gasoline low-power engines
Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 30, 12, 2008 | DOI

Conference Paper
Castaño, C., Sánchez, Á., Grande, J.A., Paz, C.,
Advantages in the EGR Cooler Performance by Using Internal Corrugated Tubes Technology
SAE Technical Papers, 2007-January, January, 2007 | DOI

Review
Míguez, J.L., López-González, L.M., Porteiro, J., Paz, C., Granada, E., Morán, J.C.,
Contribution of renewable energy sources to electricity production in galicia (Spain)
Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 28, 11, 2006 | DOI

Conference Paper
García, S., Fuentes, F., Paz, C.,
The influence of self-generated magnetic fields on electric conduction in inertially confined plasma
Computational Studies, 3, , 2000 | DOI

Article
García, S., Fuentes, F., Paz, C.,
Explicit electromagnetic algorithm for 2D using a multi-fluid model in laser-produced plasmas
Computer Physics Communications, 127, 2-3, 2000 | DOI

Article
Conde, S.G., Penín, C.P., Blanco, F.F.,
Prediccion de la inmision provocada por focos puntuales: Casos de focos continuos, intermitentes e instantaneos
Ingenieria Quimica, 29, 334, 1997 | DOI

O3-INTERGAP: Tecnología de inyección de ozono para purificación de gases de esacape
Ref.: PDC2021-121778-I00
01/12/2021 – 01/01/2023 | Ministerio de Ciencia e Innovación
IPs: María Concepción Paz Penín, José Luis Míguez Tabarés

µSTHERM: Investigación experimental y numérica sobre el comportamiento térmico de superficies microtexturizadas para la mejora de la refrigeración de baterías y componentes electrónicos en vehículos eléctricos
Ref.: PID2020-114742RB-I00
01/09/2021 – 31/12/2024 | Ministerio de Ciencia e Innovación
IPs: María Concepción Paz Penín, José Luis Míguez Tabarés

Desarrollo de nuevas tecnologías de calentadores de líquido de alto voltaje (HVCH) para abordar los futuros retos de la gestión térmica en vehículos electrificados. – NETEHEV
Ref.: RTC2019-006955-4
01/06/2020 – 31/12/2022 | Ministerio de Ciencia e Innovación
IPs: María Concepción Paz Penín

Fouling en superficies de transferencia de calor: mitigación y/o regeneración
Ref.: ENE2017-87855-R
01/01/2018 – 31/12/2020 | Ministerio de Ciencia e Innovación
IPs: María Concepción Paz Penín

12/01/2021 | Jesús Vence Fernández
Contribución ao estudo de formación de depósitos hidrocarbonados en intercambiadores de calor do sistema EGR: Desenvolvemento de modelo e validación experimental
Directores: Maria Concepción Paz Penín
Cum Laude

28/06/2019 | Christian Gil Pereira
Contribucións ao estudo dos fenómenos aerodinámicos en trens de alta velocidade
Directores: María Concepción Paz Penín, Eduardo Suárez Porto
Cum Laude