Félix Quintero Martínez

Article
Quintero, F., Doval, A.F., Goitia, A., Vázquez, R., Crespo, K., Barciela, R., Fernández-Arias, M., Lusquiños, F., Otto, A., Pou, J.,
Analysis of the oscillations induced by a supersonic jet applied to produce nanofibers
International Journal of Mechanical Sciences, 238, , 2023 | DOI

Article
Solanki, A.K., Autefage, H., Rodriguez, A.R., Agarwal, S., Penide, J., Mahat, M., Whittaker, T., Nommeots-Nomm, A., Littmann, E., Payne, D.J., Metcalfe, A.D., Quintero, F., Pou, J., Stevens, M.M., Jones, J.R.,
Cobalt containing glass fibres and their synergistic effect on the HIF-1 pathway for wound healing applications
Frontiers in Bioengineering and Biotechnology, 11, , 2023 | DOI

Article
Penide, J., Quintero, F., Fernández, J.L., Fernández-Arias, M., Barciela, R., del Val, J., Lusquiños, F., Pou, J.,
Anamorphic beam shaping system designed to optimize irradiance distribution in the Cofiblas process for glass nanofibers production
Optics and Lasers in Engineering, 152, , 2022 | DOI

Book Chapter
Comesaña, R., del Val, J., Quintero, F., Riveiro, A., Arias-González, F., Boutinguiza, M., Lusquiños, F., Pou, J.,
Laser cladding and laser direct glass deposition of bioactive glass and glass-ceramics
Bioactive Glasses and Glass-Ceramics: Fundamentals and Applications, , , 2022 | DOI

Book Chapter
Riveiro, A., Penide, J., Comesaña, R., Quintero, F., Gago, B., Barciela, R., Fernández-Arias, M., del Val, J., Lusquiños, F., Pou, J.,
Bioactive glass nanofibers: synthesis and applications
New Trends in Smart Nanostructured Biomaterials in Health Sciences, , , 2022 | DOI

Conference Paper
Calvo-García, E., Comesaña, R., Riveiro, A., del Val, J., Badaoui, A., Quintero, F., Boutinguiza, M., Lusquiños, F., Pou, J.,
Experimental study of strength and fracture toughness of laser-blasted glass
Procedia Structural Integrity, 42, , 2022 | DOI

Article
Riveiro, A., Amorim, S., Solanki, A., Costa, D.S., Pires, R.A., Quintero, F., del Val, J., Comesaña, R., Badaoui, A., Lusquiños, F., Maçon, A.L.B., Tallia, F., Jones, J.R., Reis, R.L., Pou, J.,
Hyaluronic acid hydrogels reinforced with laser spun bioactive glass micro- and nanofibres doped with lithium
Materials Science and Engineering C, 126, , 2021 | DOI

Article
Barciela, R., Quintero, F., Doval, A.F., Fernández-Arias, M., Del Val, J., Comesaña, R., Pou, J.,
Monte Carlo simulation of a LSC based on stacked layers of fiber arrays with core-coating different absorbing properties
Optics Express, 29, 13, 2021 | DOI

Article
Quintero, F., Penide, J., Riveiro, A., del Val, J., Comesaña, R., Lusquiños, F., Pou, J.,
Continuous fiberizing by laser melting (Cofiblas): Production of highly flexible glass nanofibers with effectively unlimited length
Science Advances, 6, 6, 2020 | DOI

Conference Paper
Riveiro, A., Pou, P., del Val, J., Comesaña, R., Arias-González, F., Lusquiños, F., Boutinguiza, M., Quintero, F., Badaoui, A., Pou, J.,
Laser texturing to control the wettability of materials
Procedia CIRP, 94, , 2020 | DOI

Article
Comesaña, R., Riveiro, A., del Val, J., Badaoui, A., Penide, J., Quintero, F., Boutinguiza, M., Lusquiños, F., Pou, J.,
Laser surface modification of structural glass for anti-slip applications
Ceramics International, 45, 18, 2019 | DOI

Article
Pou, P., del Val, J., Riveiro, A., Comesaña, R., Arias-González, F., Lusquiños, F., Bountinguiza, M., Quintero, F., Pou, J.,
Laser texturing of stainless steel under different processing atmospheres: From superhydrophilic to superhydrophobic surfaces
Applied Surface Science, 475, , 2019 | DOI

Article
Penide, J., Riveiro, A., Soto, R., Boutinguiza, M., Arias-Gonzalez, F., del Val, J., Comesaña, R., Lusquiños, F., Quintero, F., Pou, J.,
Laser microdrilling of slate tiles
Materials, 12, 3, 2019 | DOI

Review
Riveiro, A., Quintero, F., Boutinguiza, M., del Val, J., Comesaña, R., Lusquiños, F., Pou, J.,
Laser cutting: A review on the influence of assist gas
Materials, 12, 1, 2019 | DOI

Book Chapter
Riveiro, A., Chantada, A., Soto, R., del Val, J., Arias-González, F., Comesaña, R., Boutinguiza, M., Quintero, F., Lusquiños, F., Pou, J.,
Laser surface texturing of thermoplastics to improve biological performance
Materials for Biomedical Engineering: Thermoset and Thermoplastic Polymers, , , 2019 | DOI

Book Chapter
Penide, J., Quintero, F., Val, J.d., Comesaña, R., Lusquiños, F., Riveiro, A., Pou, J.,
Bioactive glass nanofibers for tissue engineering
Materials for Biomedical Engineering: Inorganic Micro- and Nanostructures, , , 2019 | DOI

Conference Paper
Riveiro, A., Quintero, F., Del Val, J., Pires, R.A., Comesaña, R., Lusquiños, F., Jones, J.R., Reis, R.L., Pou, J.,
Laser spinning of 13-93 bioactive glass nanofibers
MS and T 2019 – Materials Science and Technology 2019, , , 2019 | DOI

Article
Penide, J., del Val, J., Riveiro, A., Soto, R., Comesaña, R., Quintero, F., Boutinguiza, M., Lusquiños, F., Pou, J.,
Laser surface blasting of granite stones using a laser scanning system
Coatings, 9, 2, 2019 | DOI

Article
del Val, J., Comesaña, R., Riveiro, A., Lusquiños, F., Quintero, F., Boutinguiza, M., Pou, J.,
Laser direct writing of Co-superalloy lines for micro-fabrication applications
Surface and Coatings Technology, 345, , 2018 | DOI

Conference Paper
Lusquiños, F., Soto, R., Boutinguiz, M., Quintero, F., Riveiro, A., Comesaña, R., Del Val, J., Pou, J.,
“Industrial applications of lasers” at the University of Vigo as legacy of Professor Mariano Pérez-Amor
Procedia CIRP, 74, , 2018 | DOI

Article
Arias-González, F., del Val, J., Comesaña, R., Penide, J., Lusquiños, F., Quintero, F., Riveiro, A., Boutinguiza, M., Gil, F.J., Pou, J.,
Microstructure and crystallographic texture of pure titanium parts generated by laser additive manufacturing
Metals and Materials International, 24, 1, 2018 | DOI

Article
Riveiro, A., Quintero, F., Val, J.d., Boutinguiza, M., Comesaña, R., Lusquiños, F., Pou, J.,
Laser cutting using off-axial supersonic rectangular nozzles
Precision Engineering, 51, , 2018 | DOI

Book Chapter
Riveiro, A., Quintero, F., Pou, J.
Laser Fusion Cutting of Difficult Materials
Advances in Laser Materials Processing: Technology, Research and Applications, , , 2017 | DOI

Article
Chantada, A., Penide, J., Riveiro, A., del Val, J., Quintero, F., Meixus, M., Soto, R., Lusquiños, F., Pou, J.,
Increasing the hydrophobicity degree of stonework by means of laser surface texturing: An application on Zimbabwe black granites
Applied Surface Science, 418, , 2017 | DOI

Article
Arias-González, F., del Val, J., Comesaña, R., Penide, J., Lusquiños, F., Quintero, F., Riveiro, A., Boutinguiza, M., Pou, J.,
Laser cladding of phosphor bronze
Surface and Coatings Technology, 313, , 2017 | DOI

Article
Riveiro, A., Quintero, F., Lusquiños, F., del Val, J., Comesaña, R., Boutinguiza, M., Pou, J.,
Laser cutting of Carbon Fiber Composite materials
Procedia Manufacturing, 13, , 2017 | DOI

Article
Arias-González, F., del Val, J., Comesaña, R., Penide, J., Lusquiños, F., Quintero, F., Riveiro, A., Boutinguiza, M., Pou, J.,
Production of phosphor bronze coatings by laser cladding
Procedia Manufacturing, 13, , 2017 | DOI

Article
Riveiro, A., Quintero, F., del Val, J., Boutinguiza, M., Wallerstein, D., Comesaña, R., Lusquiños, F., Pou, J.,
Laser cutting of aluminum alloy Al-2024-T3
Procedia Manufacturing, 13, , 2017 | DOI

Article
Chantada, A., Penide, J., Pou, P., Riveiro, A., del Val, J., Quintero, F., Soto, R., Lusquiños, F., Pou, J.,
Laser surface texturing of granite
Procedia Manufacturing, 13, , 2017 | DOI

Article
del Val, J., Arias-González, F., Barro, O., Riveiro, A., Comesaña, R., Penide, J., Lusquiños, F., Bountinguiza, M., Quintero, F., Pou, J.,
Functionally graded 3D structures produced by laser cladding
Procedia Manufacturing, 13, , 2017 | DOI

Article
Echezarreta-López, M.M., De Miguel, T., Quintero, F., Pou, J., Landín, M.,
Fabrication of Zn-Sr-doped laser-spinning glass nanofibers with antibacterial properties
Journal of Biomaterials Applications, 31, 6, 2017 | DOI

Article
Riveiro, A., Mejías, A., Soto, R., Quintero, F., Del Val, J., Boutinguiza, M., Lusquiños, F., Pardo, J., Pou, J.,
CO<inf>2</inf> laser cutting of natural granite
Optics and Laser Technology, 76, , 2016 | DOI

Article
Esteban-Tejeda, L., Cabal, B., Torrecillas, R., Prado, C., Fernandez-Garcia, E., López-Piriz, R., Quintero, F., Pou, J., Penide, J., Moya, J.S.,
Antimicrobial activity of submicron glass fibres incorporated as a filler to a dental sealer
Biomedical Materials (Bristol), 11, 4, 2016 | DOI

Article
Riveiro, A., Soto, R., Del Val, J., Comesaña, R., Boutinguiza, M., Quintero, F., Lusquiños, F., Pou, J.,
Texturing of polypropylene (PP) with nanosecond lasers
Applied Surface Science, 374, , 2016 | DOI

Article
Arias-González, F., Del Val, J., Comesaña, R., Penide, J., Lusquiños, F., Quintero, F., Riveiro, A., Boutinguiza, M., Pou, J.,
Fiber laser cladding of nickel-based alloy on cast iron
Applied Surface Science, 374, , 2016 | DOI

Conference Paper
Penide, J., Quintero, F., Arias-González, F., Fernández, A., Del Val, J., Comesaña, R., Riveiro, A., Lusquiños, F., Pou, J.,
Everlasting dark printing on alumina by laser
Physics Procedia, 83, , 2016 | DOI

Article
Del Val, J., López-Cancelos, R., Riveiro, A., Badaoui, A., Lusquiños, F., Quintero, F., Comesaña, R., Boutinguiza, M., Pou, J.,
On the fabrication of bioactive glass implants for bone regeneration by laser assisted rapid prototyping based on laser cladding
Ceramics International, 42, 1, 2016 | DOI

Article
Comesaña, R., Lusquiños, F., Del Val, J., Quintero, F., Riveiro, A., Boutinguiza, M., Jones, J.R., Hill, R.G., Pou, J.,
Toward smart implant synthesis: Bonding bioceramics of different resorbability to match bone growth rates
Scientific Reports, 5, , 2015 | DOI

Conference Paper
Penide, J., Quintero, F., Riveiro, A., Fernández, A., Del Val, J., Comesaña, R., Lusquiños, F., Pou, J.,
High contrast laser marking of alumina
Applied Surface Science, 336, , 2015 | DOI

Article
Echezarreta-López, M.M., De Miguel, T., Quintero, F., Pou, J., Landin, M.,
Antibacterial properties of laser spinning glass nanofibers
International Journal of Pharmaceutics, 477, 1-2, 2014 | DOI

Article
Quintero, F., Dieste, Ó., Penide, J., Lusquiños, F., Riveiro, A., Pou, J.,
Nonconventional production of glass nanofibers by laser spinning
Journal of the American Ceramic Society, 97, 10, 2014 | DOI

Conference Paper
Riveiro, A., Soto, R., Del Val, J., Comesaña, R., Boutinguiza, M., Quintero, F., Lusquiños, F., Pou, J.,
Laser surface modification of ultra-high-molecular-weight polyethylene (UHMWPE) for biomedical applications
Applied Surface Science, 302, , 2014 | DOI

Conference Paper
Penide, J., Quintero, F., Del Val, J., Comesaña, R., Lusquiños, F., Riveiro, A., Pou, J.,
Laser Spinning: A new technique for nanofiber production
Physics Procedia, 56, C, 2014 | DOI

Conference Paper
Lusquiños, F., Del Val, J., Arias-González, F., Comesaña, R., Quintero, F., Riveiro, A., Boutinguiza, M., Jones, J.R., Hill, R.G., Pou, J.,
Bioceramic 3D implants produced by laser assisted additive manufacturing
Physics Procedia, 56, C, 2014 | DOI

Conference Paper
Cabal, B., Quintero, F., Díaz, L.A., Rojo, F., Dieste, O., Pou, J., Torrecillas, R., Moya, J.S.,
Composite of silver nanoparticles in glass nanofibers produced by laser spinning
Technical Proceedings of the 2014 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2014, 1, , 2014 | DOI

Conference Paper
Sánchez-Castillo, A., Quintero, F., Espinosa-Medina, M.A., Carbajal-De La Torre, G., Pou-Saracho, J.M., Lusquiños-Rodríguez, F., Ortiz-Ruiz, M., Martínez-Valencia, A.B.,
Removal of graffiti from Morelia’s quarry stone by high power diode laser
Materials Research Society Symposium Proceedings, 1618, , 2014 | DOI

Conference Paper
Del Val, J., Lusquiños, F., Comesaña, R., Riveiro, A., Quintero, F., Pou, J.,
A highly versatile novel technique based on laser cladding to produce coatings in the micrometer range
ICALEO 2013 – 32nd International Congress on Applications of Lasers and Electro-Optics, , , 2013 | DOI

Conference Paper
Quintero, F., Riveiro, A., Lusquiños, F., Penide, J., Arias-González, F., Del Val, J., Comesaña, R., Boutinguiza, M., Pou, J.,
Laser processing of phenolic wood substitutes
Proceedings of SPIE – The International Society for Optical Engineering, 8785, , 2013 | DOI

Conference Paper
Arias-González, F., Del Val, J., Comesaña, R., Lusquiños, F., Quintero, F., Riveiro, A., Boutinguiza, M., Pou, J.,
Processing of pure Ti by rapid prototyping based on laser cladding
Proceedings of SPIE – The International Society for Optical Engineering, 8785, , 2013 | DOI

Conference Paper
Penide, J., Quintero, F., Riveiro, A., Sánchez-Castillo, A., Comesaña, R., Del Val, J., Lusquiños, F., Pou, J.,
Laser removal of graffiti from pink morelia quarry
Proceedings of SPIE – The International Society for Optical Engineering, 8785, , 2013 | DOI

Conference Paper
Lusquiños, F., Arias-González, F., Penide, J., Del Val, J., Comesaña, R., Quintero, F., Riveiro, A., Boutinguiza, M., Pascual, M.J., Durán, A., Pou, J.,
Laser bioengineering of glass-titanium implants surface
Proceedings of SPIE – The International Society for Optical Engineering, 8785, , 2013 | DOI

Conference Paper
Quintero, F., Penide, J., Comesaña, R., Lusquiños, F., Riveiro, A., Pou, J.,
Production of glass nanofibers with tailored compositions by laser spinning
Technical Proceedings of the 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013, 1, , 2013 | DOI

Article
Cabal, B., Quintero, F., Díaz, L.A., Rojo, F., Dieste, O., Pou, J., Torrecillas, R., Moya, J.S.,
Nanocomposites of silver nanoparticles embedded in glass nanofibres obtained by laser spinning
Nanoscale, 5, 9, 2013 | DOI

Article
Penide, J., Quintero, F., Riveiro, A., Sánchez-Castillo, A., Comesaña, R., Del Val, J., Lusquiños, F., Pou, J.,
Removal of graffiti from quarry stone by high power diode laser
Optics and Lasers in Engineering, 51, 4, 2013 | DOI

Conference Paper
Nogueiras, M., Penide, J., Comesaña, R., Del Val, J., Quintero, F., Boutinguiza, M., Lusquiños, F., Pou, J.,
Feasibility study of wide band laser surface treatment
Physics Procedia, 41, , 2013 | DOI

Conference Paper
Dieste, O., Penide, J., Quintero, F., Riveiro, A., Comesaña, R., Lusquiños, F., Pou, J.,
Glass nanofibers from fragile melts produced by laser spinning
Physics Procedia, 41, , 2013 | DOI

Conference Paper
Boutinguiza, M., Del Val, J., Riveiro, A., Lusquiños, F., Quintero, F., Comesaña, R., Pou, J.,
Synthesis of titanium oxide nanoparticles by Ytterbium fiber laser ablation
Physics Procedia, 41, , 2013 | DOI

Conference Paper
Boutinguiza, M., Comesaña, R., Val, J.D., Arias-González, F., Penide, J., Quintero, F., Riveiro, A., Lusquiños, F., Pou, J.,
Marine resources and sub-products valorisation for medical applications by laser assisted techniques
ICALEO 2013 – 32nd International Congress on Applications of Lasers and Electro-Optics, , , 2013 | DOI

Conference Paper
Riveiro, A., Soto, R., Comesaña, R., Boutinguiza, M., Del Val, J., Quintero, F., Lusquiños, F., Pou, J.,
Laser surface modification of PEEK
Applied Surface Science, 258, 23, 2012 | DOI

Article
Riveiro, A., Quintero, F., Lusquiños, F., Del Val, J., Comesaña, R., Boutinguiza, M., Pou, J.,
Experimental study on the CO <inf>2</inf> laser cutting of carbon fiber reinforced plastic composite
Composites Part A: Applied Science and Manufacturing, 43, 8, 2012 | DOI

Article
Boutinguiza, M., Lusquiños, F., Pou, J., Soto, R., Quintero, F., Comesaña, R.,
Thermal properties measurement of slate using laser flash method
Optics and Lasers in Engineering, 50, 5, 2012 | DOI

Conference Paper
Del Val, J., Riveiro, A., Comesaña, R., Lusquiños, F., Bountinguiza, M., Quintero, F., Pou, J.,
Laser-assisted manufacturing of porous metallic structures
ICALEO 2012 – 31st International Congress on Applications of Lasers and Electro-Optics, , , 2012 | DOI

Conference Paper
Riveiro, A., Soto, R., Comesaña, R., Boutinguiza, M., Del Val, J., Quintero, F., Lusquiños, F., Pou, J.,
Laser surface texturing of bioactive materials
ICALEO 2012 – 31st International Congress on Applications of Lasers and Electro-Optics, , , 2012 | DOI

Conference Paper
Penide, J., Quintero, F., Riveiro, A., Sánchez-Castillo, A., Comesaña, R., Del Val, J., Lusquiños, F., Pou, J.,
Laser cleaning of graffiti from building stone using high power diode laser
ICALEO 2012 – 31st International Congress on Applications of Lasers and Electro-Optics, , , 2012 | DOI

Conference Paper
Comesaña, R., Lusquiños, F., Del Val, J., Quintero, F., Riveiro, A., Boutinguiza, M., Jones, J.R., Hill, R.G., Pou, J.,
One-step production of BG implants by laser cladding
24th European Conference on Biomaterials – Annual Conference of the European Society for Biomaterials, , , 2011 | DOI

Conference Paper
Quintero, F., Comesaña, R., Lusquiños, F., Riveiro, A., Jones, J.R., Hill, R.G., Pou, J.,
Production of zinc and strontium containing bioactive glass nanofibers
24th European Conference on Biomaterials – Annual Conference of the European Society for Biomaterials, , , 2011 | DOI

Article
Quintero, F., Riveiro, A., Lusquiños, F., Comesaña, R., Pou, J.,
CO<inf>2</inf> laser cutting of phenolic resin boards
Journal of Materials Processing Technology, 211, 11, 2011 | DOI

Article
Dieste, O., Quintero, F., Pou, J., Lusquiños, F., Riveiro, A.,
Influence of the working conditions on nanofiber diameters obtained by Laser Spinning
Applied Physics A: Materials Science and Processing, 104, 4, 2011 | DOI

Article
Riveiro, A., Quintero, F., Lusquiños, F., Comesaña, R., Pou, J.,
Study of melt flow dynamics and influence on quality for CO<inf>2</inf> laser fusion cutting
Journal of Physics D: Applied Physics, 44, 13, 2011 | DOI

Conference Paper
Riveiro, A., Quintero, F., Lusquiños, F., Comesaña, R., Pou, J.,
Effects of processing parameters on laser cutting of aluminium-copper alloys using off-axial supersonic nozzles
Applied Surface Science, 257, 12, 2011 | DOI

Conference Paper
Del Val, J., Riveiro, A., Comesaña, R., Lusquiños, F., Boutinguiza, M., Quintero, F., Pou, J.,
Production of aluminum foams by laser cladding
30th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2011, , , 2011 | DOI

Conference Paper
Del Val, J., Comesaña, R., Lusquiños, F., Quintero, F., Riveiro, A., Boutinguiza, M., Pou, J.,
Laser-assisted manufacturing of bioactive glass implants for cranial defect restoration
30th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2011, , , 2011 | DOI

Article
Comesaña, R., Lusquiños, F., Del Val, J., López-Álvarez, M., Quintero, F., Riveiro, A., Boutinguiza, M., De Carlos, A., Jones, J.R., Hill, R.G., Pou, J.,
Three-dimensional bioactive glass implants fabricated by rapid prototyping based on CO<inf>2</inf> laser cladding
Acta Biomaterialia, 7, 9, 2011 | DOI

Conference Paper
Quintero, F., Riveiro, A., Lusquiños, F., Comesaña, R., Pou, J.,
Feasibility study on laser cutting of phenolic resin boards
Physics Procedia, 12, PART 1, 2011 | DOI

Conference Paper
Riveiro, A., Quintero, F., Lusquiños, F., Comesaña, R., Del Val, J., Pou, J.,
The role of the assist gas nature in laser cutting of aluminum alloys
Physics Procedia, 12, PART 1, 2011 | DOI

Article
Comesaña, R., Lusquiños, F., del Val, J., Malot, T., López-Álvarez, M., Riveiro, A., Quintero, F., Boutinguiza, M., Aubry, P., De Carlos, A., Pou, J.,
Calcium phosphate grafts produced by rapid prototyping based on laser cladding
Journal of the European Ceramic Society, 31, 1-2, 2011 | DOI

Article
Riveiro, A., Quintero, F., Lusquiños, F., Comesaña, R., Pou, J.,
Influence of assist gas nature on the surfaces obtained by laser cutting of Al-Cu alloys
Surface and Coatings Technology, 205, 7, 2010 | DOI

Article
Riveiro, A., Quintero, F., Lusquiños, F., Comesaña, R., Pou, J.,
Parametric investigation of CO<inf>2</inf> laser cutting of 2024-T3 alloy
Journal of Materials Processing Technology, 210, 9, 2010 | DOI

Conference Paper
Del Val, J., Comesaña, R., Lusquiños, F., Riveiro, A., Quintero, F., Pou, J.,
Production of micro-scale coatings by novel laser micro-cladding technique (invited presentation)
4th Pacific International Conference on Applications of Lasers and Optics, PICALO 2010, , , 2010 | DOI

Article
del Val, J., Comesaña, R., Lusquiños, F., Boutinguiza, M., Riveiro, A., Quintero, F., Pou, J.,
Laser cladding of Co-based superalloy coatings: Comparative study between Nd:YAG laser and fibre laser
Surface and Coatings Technology, 204, 12-13, 2010 | DOI

Conference Paper
Riveiro, A., Quintero, F., Comesaña, R., Del Val, J., Boutinguiza, M., Lusquiños, F., Pou, J.,
The influence of the assist gas flow regime on the laser cutting of aeronautic aluminium alloys
4th Pacific International Conference on Applications of Lasers and Optics, PICALO 2010, , , 2010 | DOI

Book Chapter
Riveiro, A., Quintero, F., Pou, J.,
Laser fusion cutting of difficult materials
Advances in Laser Materials Processing: Technology, Research and Application, , , 2010 | DOI

Conference Paper
Del Val, J., Comesaña, R., Lusquiños, F., Riveiro, A., Quintero, F., Pou, J.,
Downscaling of conventional laser cladding technique to micro-engineering
Physics Procedia, 5, PART 1, 2010 | DOI

Conference Paper
Comesaña, R., Lusquiños, F., Del Val, J., Malot, T., Riveiro, A., Quintero, F., Boutinguiza, M., Aubry, P., Pou, J.,
Three-dimensional laser-assisted processing of bioceramics
Physics Procedia, 5, PART 1, 2010 | DOI

Conference Paper
Quintero, F., Riveiro, A., Lusquiños, F., Comesaña, R., Pou, J.,
Laser cutting of phenolic resin panels: Identification of potential hazards
29th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2010 – Congress Proceedings, 103, , 2010 | DOI

Conference Paper
Del Val, J., Comesaña, R., Lusquiños, F., Riveiro, A., Quintero, F., Pou, J.,
Laser micro-cladding: A novel laser additive technique to produce hard micro-coatings
29th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2010 – Congress Proceedings, 103, , 2010 | DOI

Conference Paper
Riveiro, A., Quintero, F., Lusquiños, F., Boutinguiza, M., Comesaña, R., Pou, J.,
Relationships between the melt dynamics and cut finishing in laser cutting
29th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2010 – Congress Proceedings, 103, , 2010 | DOI

Article
Comesaña, R., Quintero, F., Lusquiños, F., Pascual, M.J., Boutinguiza, M., Durán, A., Pou, J.,
Laser cladding of bioactive glass coatings
Acta Biomaterialia, 6, 3, 2010 | DOI

Article
Quintero, F., Pou, J., Comesaña, R., Lusquiños, F., Riveiro, A., Mann, A.B., Hill, R.G., Wu, Z.Y., Jones, J.R.,
Laser spinning of bioactive glass nanofibers
Advanced Functional Materials, 19, 19, 2009 | DOI

Article
Lusquiños, F., Comesaña, R., Riveiro, A., Quintero, F., Pou, J.,
Fibre laser micro-cladding of Co-based alloys on stainless steel
Surface and Coatings Technology, 203, 14, 2009 | DOI

Article
Quintero, F., Dieste, O., Pou, J., Lusqu?os, F., Riveiro, A.,
On the conditions to produce micro- and nanofibres by laser spinning
Journal of Physics D: Applied Physics, 42, 6, 2009 | DOI

Conference Paper
Riveiro, A., Quintero, F., Comesaña, R., Del Val, J., Boutinguiza, M., Lusquiños, F., Pou, J.,
Effects of internal design geometry in de Laval nozzles for off-axis assist gas injection on inert-gas laser cutting performance
ICALEO 2009 – 28th International Congress on Applications of Lasers and Electro-Optics, Congress Proceedings, 102, , 2009 | DOI

Conference Paper
Lusquiños, F., Comesaña, R., Del Val, J., Riveiro, A., Quintero, F., Pou, J.,
Feasibility of laser microcladding to produce hard coatings
ICALEO 2009 – 28th International Congress on Applications of Lasers and Electro-Optics, Congress Proceedings, 102, , 2009 | DOI

Conference Paper
Quintero, F., Dieste, O., Pou, J., Lusquiños, F., Riveiro, A.,
Experimental and theoretical study on the synthesis of nanofibers by laser spinning
ICALEO 2009 – 28th International Congress on Applications of Lasers and Electro-Optics, Congress Proceedings, 102, , 2009 | DOI

Conference Paper
Comesaña, R., Lusquiños, F., Del Val, J., Malot, T., Riveiro, A., Quintero, F., Boutinguiza, M., PAubry, , Pou, J.,
Laser-assisted processing of 3D bioceramic structures
ICALEO 2009 – 28th International Congress on Applications of Lasers and Electro-Optics, Congress Proceedings, 102, , 2009 | DOI

Conference Paper
Comesaña, R., Lusquiños, F., Del Val, J., Ventosinos, V., Vázquez, R., Riveiro, A., Quintero, F., Santísima-Trinidad, H., Pou, J.,
Laser-assisted production of electrical discharge machining (EDM) electrodes: A comparative study between rapid prototyping by selective laser sintering and laser surface cladding techniques
ICALEO 2008 – 27th International Congress on Applications of Lasers and Electro-Optics, Congress Proceedings, , , 2008 | DOI

Article
Riveiro, A., Quintero, F., Lusquiños, F., Pou, J., Pérez-Amor, M.,
Laser cutting of 2024-T3 aeronautic aluminum alloy
Journal of Laser Applications, 20, 4, 2008 | DOI

Article
Lusquiños, F., Pou, J., Quintero, F., Pérez-Amor, M.,
Laser cladding of SiC/Si composite coating on Si-SiC ceramic substrates
Surface and Coatings Technology, 202, 9, 2008 | DOI

Conference Paper
Pou, J., Riveiro, A., Quintero, F., Lusquiños, F., Comesaña, R.,
Applications of a novel supersonic laser cutting head
3rd Pacific International Conference on Applications of Lasers and Optics, PICALO 2008 – Conference Proceedings, , , 2008 | DOI

Conference Paper
Riveiro, A., Lusquiños, F., Comesaña, R., Quintero, F., Pou, J.,
Obtaining thermal damping metallic porous coating on ceramics by means of supersonic laser spray technique
ICALEO 2008 – 27th International Congress on Applications of Lasers and Electro-Optics, Congress Proceedings, , , 2008 | DOI

Conference Paper
Riveiro, A., Quintero, F., Lusquiños, F., Pou, J., Salminen, A., Kujanpaa, V.,
Influence of assist gas in fibre laser cutting of aluminum-copper alloy
ICALEO 2008 – 27th International Congress on Applications of Lasers and Electro-Optics, Congress Proceedings, , , 2008 | DOI

Conference Paper
Lusquiños, F., Boutinguiza, M., Comesaña, R., Riveiro, A., Quintero, F., Pou, J.,
Production of calcium phosphate particles from marine wastes by gas jet assisted laser heating
Materials Science Forum, 587-588, , 2008 | DOI

Article
Quintero, F., Pou, J., Lusquiños, F., Riveiro, A.,
Experimental analysis of the production of micro- and nanofibres by Laser Spinning
Applied Surface Science, 254, 4, 2007 | DOI

Article
Boutinguiza, M., Lusquiños, F., Comesaña, R., Riveiro, A., Quintero, F., Pou, J.,
Production of microscale particles from fish bone by gas flow assisted laser ablation
Applied Surface Science, 254, 4, 2007 | DOI

Article
Lusquiños, F., Conde, J.C., Bonss, S., Riveiro, A., Quintero, F., Comesaña, R., Pou, J.,
Theoretical and experimental analysis of high power diode laser (HPDL) hardening of AISI 1045 steel
Applied Surface Science, 254, 4, 2007 | DOI

Article
Riveiro, A., Lusquiños, F., Comesaña, R., Quintero, F., Pou, J.,
Supersonic laser spray of aluminium alloy on a ceramic substrate
Applied Surface Science, 254, 4, 2007 | DOI

Article
Quintero, F., Pou, J., Lusquiños, F., Riveiro, A., Pérez-Amor, M., Fernandes, A.J.S.,
Single-pass and multi-pass laser cutting of Si-SiC: Assessment of the cut quality and microstructure in the heat affected zone
Journal of Laser Applications, 19, 3, 2007 | DOI

Article
Quintero, F., Mann, A.B., Pou, J., Lusquiños, F., Riveiro, A.,
Rapid production of ultralong amorphous ceramic nanofibers by laser spinning
Applied Physics Letters, 90, 15, 2007 | DOI

Conference Paper
Lusquiños, F., Comesaña, R., Riveiro, A., Quintero, F., Del Val, J., Pou, J.,
Rapid fabrication of electrical discharge machining (EDM) electrodes by laser surface cladding
26th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2007 – Congress Proceedings, , , 2007 | DOI

Conference Paper
Pou, J., Lusquiños, F., Quintero, F., Riveiro, A., Comesaña, R., Boutinguiza, M., León, B., Pérez-Amor, M.,
Laser processing and synthesis of ceramic biomaterials for osseointegrable applications
26th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2007 – Congress Proceedings, , , 2007 | DOI

Conference Paper
Lusquiños, F., Comesaña, R., Riveiro, A., Quintero, F., Pou, J.,
Parametric investigation of microcladding by fibre laser of stellite on stainless steel
26th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2007 – Congress Proceedings, , , 2007 | DOI

Conference Paper
Riveiro, A., Gómez, B., Quintero, F., Lusquiños, F., Comesaña, R., Pou, J.,
Parametric study on CO<inf>2</inf> laser cutting of carbon fibre reinforced plastic composite
26th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2007 – Congress Proceedings, , , 2007 | DOI

Article
Quintero, F., Pou, J., Fernández, J.L., Doval, A.F., Lusquiños, F., Boutinguiza, M., Soto, R., Pérez-Amor, M.,
Optimization of an off-axis nozzle for assist gas injection in laser fusion cutting
Optics and Lasers in Engineering, 44, 11, 2006 | DOI

Conference Paper
Riveiro, A., Boutinguiza, M., Soto, R., Lusquiños, F., Quintero, F., Pou, J., Pérez-Amor, M.,
Laser cutting of natural stone slabs
ICALEO 2006 – 25th International Congress on Applications of Laser and Electro-Optics, Congress Proceedings, , , 2006 | DOI

Conference Paper
Lusquiños, F., Comesaña, R., Riveiro, A., Quintero, F., Pou, J.,
Laser cladding from marine wastes for biomedical applications
ICALEO 2006 – 25th International Congress on Applications of Laser and Electro-Optics, Congress Proceedings, , , 2006 | DOI

Conference Paper
Quintero, F., Pou, J., Lusquiños, F., Riveiro, A., Mann, A.B.,
Production of biofibers by laser spinning
ICALEO 2006 – 25th International Congress on Applications of Laser and Electro-Optics, Congress Proceedings, , , 2006 | DOI

Conference Paper
Riveiro, A., Pou, J., Lusquiños, F., Boutinguiza, M., Quintero, F., Soto, R., Comesaña, R., Pérez-Amor, M.,
Laser cutting of 2024-T3 aeronautic aluminium alloy
ICALEO 2006 – 25th International Congress on Applications of Laser and Electro-Optics, Congress Proceedings, , , 2006 | DOI

Conference Paper
Soto, R., Boutinguiza, M., Lusquiños, F., Pou, J., Quintero, F., Pérez-Amor, M.,
Laser drilling of natural stones
Materials Science Forum, 514-516, PART 1, 2006 | DOI

Article
Quintero, F., Pou, J., Lusquiños, F., Boutinguiza, M., Soto, R., Pérez-Amor, M.,
Laser cutting of mullite-alumina structural elements
Boletin de la Sociedad Espanola de Ceramica y Vidrio, 45, 2, 2006 | DOI

Conference Paper
Rodríguez, F., Dorrío, B.V., Doval, A.F., Trillo, C., Quintero, F., Miranda, M., López, C., Fernández, J.L.
Lavai nozzle flow characterization by Fourier-Transform Mach-Zehnder interferometry
Proceedings of SPIE – The International Society for Optical Engineering, 5856 PART II, , 2005 | DOI

Conference Paper
Boutinguiza, M., Soto, R., Lusquiños, F., Quintero, F., Pou, J., Pérez-Amor, M.,
An exploratory study on the capabilities of lasers to cut granite plates
24th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2005 – Congress Proceedings, , , 2005 | DOI

Article
Lusquiños, F., Pou, J., Boutinguiza, M., Quintero, F., Soto, R., León, B., Pérez-Amor, M.,
Main characteristics of calcium phosphate coatings obtained by laser cladding
Applied Surface Science, 247, 1-4, 2005 | DOI

Article
Quintero, F., Pou, J., Lusquiños, F., Boutinguiza, M., Soto, R., Pérez-Amor, M.,
Laser synthesis of amorphous Si-Al oxide nanowires under atmospheric conditions
Applied Surface Science, 247, 1-4, 2005 | DOI

Article
Quintero, F., Varas, F., Pou, J., Lusquiños, F., Boutinguiza, M., Soto, R., Pérez-Amor, M.,
Theoretical analysis of material removal mechanisms in pulsed laser fusion cutting of ceramics
Journal of Physics D: Applied Physics, 38, 4, 2005 | DOI

Article
Boutinguiza, M., Pou, J., Lusquiños, F., Quintero, F., Soto, R., Pérez-Amor, M., Watkins, K., Steen, W.M.,
Drilling of slate tiles by CO<inf>2</inf> laser
Journal of Materials Processing Technology, 159, 1, 2005 | DOI

Conference Paper
Boutinguiza, M., Soto, R., Lusquiños, F., Quintero, F., Pou, J., Pérez-Amor, M.,
An exploratory study on the capabilities of lasers to cut granite plates
24th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2005 – Congress Proceedings, , , 2005 | DOI

Conference Paper
Soto, R., Boutinguiza, M., Riveiro, A., Lusquiños, F., Quintero, F., Pou, J., Pérez-Amor, M.,
Laser drilling of natural granite plates
24th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2005 – Congress Proceedings, , , 2005 | DOI

Article
Quintero, F., Pou, J., Lusquiños, F., Boutinguiza, M., Soto, R., Pérez-Amor, M., Wagner, F.,
Comprehensive assessment of the CO<inf>2</inf> laser cut quality of ceramics with different assist gas injection systems
Journal of Laser Applications, 16, 4, 2004 | DOI

Article
Quintero, F., Pou, J., Lusquiños, F., Boutinguiza, M., Soto, R., Pérez-Amor, M.,
Quantitative evaluation of the quality of the cuts performed on mullite-alumina by Nd:YAG laser
Optics and Lasers in Engineering, 42, 3, 2004 | DOI

Article
Quintero, F., Pou, J., Lusquiños, F., Boutinguiza, M., Soto, R., Pérez-Amor, M.,
Large-scale fast production of amorphous Si-Al-O nanowires under ambient conditions
Applied Physics A: Materials Science and Processing, 78, 3, 2004 | DOI

Conference Paper
Quintero, F., Varas, F., Pou, J., Lusquiños, F., Boutinguiza, M., Soto, R., Pérez-Amor, M.,
A model of material removal mechanisms in pulsed laser cutting of ceramics
ICALEO 2004 – 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings, , , 2004 | DOI

Conference Paper
Lusquiños, F., Pou, J., Boutinguiza, M., Quintero, F., Soto, R., León, B., Pérez-Amor, M.,
In-depth study of mechanical and physico-chemical properties of calcium phosphate coatings obtained by laser surface cladding
ICALEO 2004 – 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings, , , 2004 | DOI

Conference Paper
Quintero, F., Pou, J., Lusquiños, F., Boutinguiza, M., Soto, R., Pérez-Amor, M., Wagner, F.,
Cutting of mullite-alumina ceramic plates with CO<inf>2</inf> laser
ICALEO 2004 – 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings, , , 2004 | DOI

Article
Sánchez-Castillo, A., Pou, J., Lusquiños, F., Quintero, F., Soto, R., Boutinguiza, M., Saavedra, M., Pérez-Amor, M.,
Dimensional characteristics of welds performed on AISI 1045 steel by means of the application of high power diode laser
Revista de Metalurgia (Madrid), 40, 3, 2004 | DOI

Conference Paper
Boutinguiza, M., Quintero, F., Belmonte, M., Fernandes, A.J.S., Costa, F.M., Silva, R.F., Pou, J., Pérez-Amor, M.,
Cutting of free standing CVD diamond films by optical fibre guided Nd:YAG laser
Materials Science Forum, 455-456, , 2004 | DOI

Article
Quintero, F., Pou, J., Lusquiños, F., Boutinguiza, M., Soto, R., Pérez-Amor, M.,
Comparative study of the influence of the gas injection system on the Nd:yttrium-aluminum-garnet laser cutting of advanced oxide ceramics
Review of Scientific Instruments, 74, 9, 2003 | DOI

Conference Paper
Boutinguiza, M., Quintero, F., Belmonte, M., Fernandes, A.J.S., Costa, F.M., Silva, R.F., Pou, J., Pérez-Amor, M.,
Cutting of CVD diamond by optical fibre guided Nd:YAG laser
ICALEO 2003 – 22nd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings, , , 2003 | DOI

Conference Paper
Sánchez-Castillo, A., García-Lara, H., Pou, J., Lusquiños, F., Quintero, F., Soto, R., Boutinguiza, M., Pérez-Amor, M.,
Welding of AISI 1045 steel plates by high power diode laser
ICALEO 2003 – 22nd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings, , , 2003 | DOI

Conference Paper
Quintero, F., Louzán, N., Pou, J., Lusquiños, F., Boutinguiza, M., Soto, R., Pérez-Amor, M.,
Single-pass and multi-pass laser cutting of silicon-silicon carbide (Si-SiC)
ICALEO 2003 – 22nd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings, , , 2003 | DOI

Article
Pou, J., Trillo, C., Soto, R., Doval, A.F., Boutinguiza, M., Lusquiños, F., Quintero, F., Pérez-Amor, M.,
Surface treatment of granite by high power diode laser
Journal of Laser Applications, 15, 4, 2003 | DOI

Article
Pou, J., Trillo, C., Soto, R., Doval, A.F., Boutinguiza, M., Lusquiños, F., Quintero, F., Amor, M.P.,
Laser blasting – A new method for surface treatment of dimension stones
Key Engineering Materials, 250, , 2003 | DOI

Article
Boutinguiza, M., Pou, J., Lusquiños, F., Quintero, F., Soto, R., Louzán, N., Amor, M.P.,
Potential of lasers in slate tile processing
Key Engineering Materials, 250, , 2003 | DOI

Conference Paper
Sánchez-Castillo, A., Pou, J., Rodríguez-Lage, M., Lusquiños, F., Quintero, F., Soto, R., Boutinguiza, M., Pérez-Amor, M.,
Crack-free welding of low weldability carbon steel by high power diode laser
ICALEO 2002 – 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings, , , 2002 | DOI

Conference Paper
Boutinguiza, M., Lusquiños, F., Pou, J., Soto, R., Quintero, F., Pérez-Amor, M.,
Measurement of the thermal properties of slate by the laser flash method
ICALEO 2002 – 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings, , , 2002 | DOI

Conference Paper
Sánchez-Castillo, A., Pou, J., Rodríguez-Lage, M., Lusquiños, F., Quintero, F., Soto, R., Boutinguiza, M., Pérez-Amor, M.,
Crack-free welding of low weldability carbon steel by high power diode laser
ICALEO 2002 – 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings, , , 2002 | DOI

Article
Boutinguiza, M., Lusquiños, F., Pou, J., Soto, R., Quintero, F., Pérez-Amor, M., Watkins, K.,
Cutting of slate tiles by CO<inf>2</inf> laser
Journal of Laser Applications, 14, 1, 2002 | DOI

Article
Boutinguiza, M., Pou, J., Lusquiños, F., Quintero, F., Soto, R., Pérez-Amor, M., Watkins, K., Steen, W.M.,
CO<inf>2</inf> laser cutting of slate
Optics and Lasers in Engineering, 37, 1, 2002 | DOI

Conference Paper
Pou, J., Soto, R., Trillo, C., Doval, A.F., Boutinguiza, M., Lusquiños, F., Quintero, F., Pérez-Amor, M.,
Laser surface blasting of granite
Proceedings of SPIE – The International Society for Optical Engineering, 4419, , 2001 | DOI

Conference Paper
Boutinguiza, M., Lusquiños, F., Quintero, F., Soto, R., Pou, J., Pérez-Amor, M.,
Laser processing of slate tiles
Proceedings of SPIE – The International Society for Optical Engineering, 4419, , 2001 | DOI

Conference Paper
Quintero, F., Pou, J., Lusquiños, F., Boutinguiza, M., Soto, R., Pérez-Amor, M.,
Nd:YAG laser cutting of advanced ceramics
Proceedings of SPIE – The International Society for Optical Engineering, 4419, , 2001 | DOI

Article
Pou, J., Boutinguiza, M., Quintero, F., Lusquiños, F., Soto, R., Pérez-Amor, M.,
Comparative study of the cutting of car interior trim panels reinforced by natural fibers
Journal of Laser Applications, 13, 3, 2001 | DOI

Article
Quintero, F., Pou, J., Lusquiños, F., Larosi, M., Soto, R., Perez-Amor, M.,
Cutting of ceramic plates by optical fiber guided Nd:YAG laser
Journal of Laser Applications, 13, 2, 2001 | DOI