Manuel Cabaleiro Núñez

Article
Barros, B., Conde, B., Cabaleiro, M., Solla, M., Riveiro, B.,
Multi-objective optimization-based model calibration of masonry bridges
Case Studies in Construction Materials, 19, , 2023 | DOI

Article
Pereiro, X., Cabaleiro, M., Conde, B., Riveiro, B.,
BIM methodology for cost analysis, sustainability, and management of steel structures with reconfigurable joints for industrial structures
Journal of Building Engineering, 77, , 2023 | DOI

Article
Barros, B., Conde, B., Cabaleiro, M., Riveiro, B.,
Design and testing of a decision tree algorithm for early failure detection in steel truss bridges
Engineering Structures, 289, , 2023 | DOI

Article
Barros, B., Conde, B., Cabaleiro, M., Riveiro, B.,
Deterministic and probabilistic-based model updating of aging steel bridges
Structures, 54, , 2023 | DOI

Article
Cabaleiro, M., Conde, B., González-Gaya, C., Barros, B.,
A novel fully removable walkway system with non-invasive anchors for structural health inspection and maintenance of historic steel structures
Structures, 53, , 2023 | DOI

Article
Lamas, D., Justo, A., Soilán, M., Cabaleiro, M., Riveiro, B.,
Instance and semantic segmentation of point clouds of large metallic truss bridges
Automation in Construction, 151, , 2023 | DOI

Article
Bouzas, O., Conde, B., Matos, J.C., Solla, M., Cabaleiro, M.,
Reliability-based structural assessment of historical masonry arch bridges: The case study of Cernadela bridge
Case Studies in Construction Materials, 18, , 2023 | DOI

Review
Cabaleiro, M., Conde, B., González-Gaya, C., Barros, B.,
Removable, Reconfigurable, and Sustainable Steel Structures: A State-of-the-Art Review of Clamp-Based Steel Connections
Sustainability (Switzerland), 15, 10, 2023 | DOI

Article
Otero, R., Lagüela, S., Cabaleiro, M., Sousa, H.S., Arias, P.,
Semi-automatic 3D frame modelling of wooden trusses using indoor point clouds
Structures, 47, , 2023 | DOI

Article
Rodríguez-Antuñano, I., Martínez-Sánchez, J., Cabaleiro, M., Riveiro, B.,
Anticipating the Collapse of Urban Infrastructure: A Methodology Based on Earth Observation and MT-InSAR
Remote Sensing, 15, 15, 2023 | DOI

Article
Abraldes, P., Cabaleiro, M., Sousa, H.S., Branco, J.M.,
Use of polar coordinates for improving the measurement of resistant cross-sections of existing timber elements combining laser scanner and drilling resistance tests
Measurement: Journal of the International Measurement Confederation, 204, , 2022 | DOI

Conference Paper
Gallego, M., Cabaleiro, M., Garrido, I., Conde, B., Riveiro, B.,
First Results of the Application of Infrared Thermography to the Crack Inspection in Wooden Beams
World Congress on Civil, Structural, and Environmental Engineering, , , 2022 | DOI

Article
Bouzas, O., Conde, B., Cabaleiro, M., Riveiro, B.
A holistic methodology for the non-destructive experimental characterization and reliability-based structural assessment of historical steel bridges
Engineering Structures, 270, , 2022 | DOI

Article
Bouzas, Ó., Cabaleiro, M., Conde, B., Cruz, Y., Riveiro, B.
Structural health control of historical steel structures using HBIM
Automation in Construction, 140, , 2022 | DOI

Conference Paper
Barros, B., Conde, B., Bouzas, Ó., Cabaleiro, M., Riveiro, B.
Numerical model updating of an aging steel bridge based on a multidisciplinary experimental campaign
IABSE Symposium Prague, 2022: Challenges for Existing and Oncoming Structures – Report, , , 2022 | DOI

Article
Santos, D., Cabaleiro, M., Sousa, H.S., Branco, J.M.,
Apparent and resistant section parametric modelling of timber structures in HBIM
Journal of Building Engineering, 49, , 2022 | DOI

Article
Santos, D., Sousa, H.S., Cabaleiro, M., Branco, J.M.,
HBIM Application in Historic Timber Structures: A Systematic Review
International Journal of Architectural Heritage, , , 2022 | DOI

Conference Paper
Barros, B., Conde, B., Sánchez-Aparicio, L.J., Cabaleiro, M., Bouzas, O., Riveiro, B.,
Model Calibration of a Historic Masonry Arch Bridge Using a Probabilistic Approach
Lecture Notes in Civil Engineering, 200 LNCE, , 2022 | DOI

Book Chapter
Cabaleiro, M., González-Gaya, C., Gonzalez, F.,
Experimental Analysis of the Bending Behavior of Structural Metal Joints Based on the Use of Girder Clamps to Service Life Extension of Existing Structures
RILEM Bookseries, 34, , 2022 | DOI

Conference Paper
Rúa, E., Cabaleiro, M., Conde, B., Riveiro, B.
Obtaining of variable geometry beam models for steel beams with corrosion
International Conference on Structural Health Monitoring of Intelligent Infrastructure: Transferring Research into Practice, SHMII, 2021-June, , 2021 | DOI

Article
Cabaleiro, M., Comesaña, R., González-Gaya, C., Caamaño, C.,
Analytical model for the fatigue analysis of steel joints by clamps according to the lever length
Materials, 14, 24, 2021 | DOI

Article
Rúa, E., Cabaleiro, M., Conde, B., Riveiro, B.,
First results of a methodology to obtain a 1D variable geometry model for the structural analysis of corroded steel beams from the point cloud
Structures, 33, , 2021 | DOI

Article
Cabaleiro, M., Suñer, C., Sousa, H.S., Branco, J.M.,
Combination of laser scanner and drilling resistance tests to measure geometry change for structural assessment of timber beams exposed to fire
Journal of Building Engineering, 40, , 2021 | DOI

Article
Cabaleiro, M., Moutinho, C., González-Gaya, C., Caetano, E., Rosales-Prieto, V.F.,
Analysis of stiffness of clamped joints versus bolted joints in steel structures by means of accelerometers and shaking table tests
Sensors, 21, 14, 2021 | DOI

Article
Pereira, Á., Cabaleiro, M., Conde, B., Sánchez-Rodríguez, A.,
Automatic identification and geometrical modeling of steel rivets of historical structures from lidar data
Remote Sensing, 13, 11, 2021 | DOI

Conference Paper
Bouzas, Ó., Conde, B., Cabaleiro, M., Barros, B., Riveiro, B., Riego, N.,
Reliability-based structural assessment of a historical steel railway bridge
IABSE Congress, Ghent 2021: Structural Engineering for Future Societal Needs, , , 2021 | DOI

Article
Cabaleiro, M., Conde, B., Riveiro, B., Caamaño, J.C.,
Analysis of steel connections with girder clamps according to the bolts preload
Journal of Constructional Steel Research, 168, , 2020 | DOI

Article
Hermida, J., Cabaleiro, M., Riveiro, B., Caamaño, J.C.,
Two-dimensional models of variable inertia from LiDAR data for structural analysis of timber trusses
Construction and Building Materials, 231, , 2020 | DOI

Conference Paper
Del Rio, I., Cabaleiro, M., Conde, B., Riveiro, B., Caamaño, J.C.,
Hbim application to historical steel structures: The case study of lapela bridge
World Congress on Civil, Structural, and Environmental Engineering, , , 2020 | DOI

Article
Mol, A., Cabaleiro, M., Sousa, H.S., Branco, J.M.,
HBIM for storing life-cycle data regarding decay and damage in existing timber structures
Automation in Construction, 117, , 2020 | DOI

Article
Cabaleiro, M., Riveiro, B., Conde, B., Sánchez-Rodríguez, A.,
A case study of measurements of deformations due to different loads in pieces less than 1?m from lidar data
Measurement: Journal of the International Measurement Confederation, 151, , 2020 | DOI

Article
Sánchez-Rodríguez, A., Soilán, M., Cabaleiro, M., Arias, P.,
Automated inspection of Railway Tunnels’ power line using LiDAR point clouds
Remote Sensing, 11, 21, 2019 | DOI

Conference Paper
Conde, B., Riveiro, B., Cabaleiro, M., Caamaño, J.C., Stavroulakis, G.E.,
Uncertainty sources in the structural assessment of masonry arch bridges: A case study of a single-span stone arch bridge
IABSE Symposium, Guimaraes 2019: Towards a Resilient Built Environment Risk and Asset Management – Report, , , 2019 | DOI

Article
Cuartero, J., Cabaleiro, M., Sousa, H.S., Branco, J.M.,
Tridimensional parametric model for prediction of structural safety of existing timber roofs using laser scanner and drilling resistance tests
Engineering Structures, 185, , 2019 | DOI

Conference Paper
Cabaleiro, M., González, C., Conde, B.,
Analyzing the effective length of i cross-section beams in connections with girder clamps for totally removable, reusable and reconfigurable structures
Procedia Manufacturing, 41, , 2019 | DOI

Conference Paper
Sousa, H.S., Sguazzo, C., Cabaleiro, M.,
Use of BIM in rehabilitation and assessment of the built heritage: From the visible to the intangible
IABSE Symposium, Guimaraes 2019: Towards a Resilient Built Environment Risk and Asset Management – Report, , , 2019 | DOI

Book Chapter
Sánchez, A., Riveiro, B., Puente, I., Conde, B., Mendes, N., Cabaleiro, M., Lourenço, P.B.,
Parameterization of Structural Faults in Large Historical Constructions for Further Structural Modelling Thanks to Laser Scanning Technology and Computer Vision Algorithms
RILEM Bookseries, 18, , 2019 | DOI

Conference Paper
Riveiro, B., Cubreiro, G., Conde, B., Cabaleiro, M., Lindenbergh, R., Soilán, M., Caamaño, J.C.,
Automated calibration of fem models using LiDAR point clouds
International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences – ISPRS Archives, 42, 2, 2018 | DOI

Article
Cabaleiro, M., Branco, J.M., Sousa, H.S., Conde, B.,
First results on the combination of laser scanner and drilling resistance tests for the assessment of the geometrical condition of irregular cross-sections of timber beams
Materials and Structures/Materiaux et Constructions, 51, 4, 2018 | DOI

Article
Cabaleiro, M., Hermida, J., Riveiro, B., Caamaño, J.C.,
Automated processing of dense points clouds to automatically determine deformations in highly irregular timber structures
Construction and Building Materials, 146, , 2017 | DOI

Article
Cabaleiro, M., Riveiro, B., Conde, B., Caamaño, J.C.,
Analytical T-stub model for the analysis of clamps in structural metal joints
Journal of Constructional Steel Research, 130, , 2017 | DOI

Article
Cabaleiro, M., Lindenbergh, R., Gard, W.F., Arias, P., van de Kuilen, J.W.G.,
Algorithm for automatic detection and analysis of cracks in timber beams from LiDAR data
Construction and Building Materials, 130, , 2017 | DOI

Article
Cabaleiro, M., Riveiro, B., Arias, P., Caamaño, J.C.,
Algorithm for the analysis of the geometric properties of cross-sections of timber beams with lack of material from LIDAR data
Materials and Structures/Materiaux et Constructions, 49, 10, 2016 | DOI

Article
Cabaleiro, M., Riveiro, B., Arias, P., Caamaño, J.C.,
Algorithm for the analysis of deformations and stresses due to torsion in a metal beam from LIDAR data
Structural Control and Health Monitoring, 23, 7, 2016 | DOI

Book Chapter
Cabaleiro, M., Riveiro, B., Caamaño, J.C., Arias, P.,
Metallic industrial structures. As-built and structural calculation
Non-Destructive Techniques for the Evaluation of Structures and Infrastructure, , , 2016 | DOI

Article
Conde, B., Villarino, A., Cabaleiro, M., Gonzalez-Aguilera, D.,
Geometrical issues on the structural analysis of transmission electricity towers thanks to laser scanning technology and finite element method
Remote Sensing, 7, 9, 2015 | DOI

Article
Cabaleiro, M., Riveiro, B., Arias, P., Caamaño, J.C.,
Algorithm for beam deformation modeling from LiDAR data
Measurement: Journal of the International Measurement Confederation, 76, , 2015 | DOI

Article
Cabaleiro, M., Riveiro, B., Arias, P., Caamaño, J.C., Vilán, J.A.,
Automatic 3D modelling of metal frame connections from LiDAR data for structural engineering purposes
ISPRS Journal of Photogrammetry and Remote Sensing, 96, , 2014 | DOI